Benefits of installing a new water heater in your house
If you are fixing up your dream home or simply updating your old water heater, there are lots of benefits to getting a new appliance. These include:
- Efficient – Perhaps the biggest argument to be made for installing a new hot water heater is how much more efficient they are in comparison to older models. If you live in an older home, the odds are that your water heater is from when the home first was built. While the old system might have worked well in its day, the energy standards that newer models need to follow are much more stringent, which provides a much better product. This will end up saving you tons of money over the lifetime of your new heater.
- Cost-Effective – Speaking of saving money, installing a new heater is an extremely cost-effective measure to take. In fact, even with the upfront expense of installing a new heater, you will be able to save money thanks to their efficiency. The savings from upgrading will probably pay for the new heater in a few years’ time, which should be music to your ears.
- Space-Saving – Another issue that plagues older water heaters is their size. Since they couldn’t be made up to today’s standards, old heaters had to be much bigger, and, as such, usually take up way too much space. New heaters, on the other hand, are very small and compact, which will give you a bit more room in your basement.
- Easier to Maintain – One more benefit of getting a new water heater is that they are much easier to maintain. As technology advances, old models are replaced, and getting replacement parts can become a huge problem. By installing a new water heater, you will be able to get any of its parts fixed a lot faster than if you tried to keep your old appliance up and running.
Features to consider while choosing a water heater
As you can imagine, there are lots of different features that you need to consider before you find the best water heater for your needs. In this section, we will go through all of these factors in detail, so that you can make a more informed decision when you are ready to make your final purchase.
Tankless or tanked?
The first thing that you need to decide when it comes to your new water heater is whether you want to get a model with a tank or a tankless one. Both types offer different advantages and disadvantages that you need to consider carefully.
- Tanked – Tanked models, like the Bosch 3000 T ES8, have been the standard style of water for many years. These units are much cheaper to install in comparison to tankless ones. They are, however, not quite as efficient, however, since they have a limited amount of hot water they can store. Once that is gone, the tank needs to reheat and refill before you get more hot water.
- Tankless – Tankless models, like the EcoSmart ECO 11, cost a bit more upfront, but they are extremely efficient. These appliances can provide a continuous supply of hot water, which is better for households where a lot of people take a shower right in a row.
Electric or gas?
The next decision that you need to make regarding your new water heater is whether you get a gas model or an electric one. This will depend on two factors. The first is the type of hookup that you have in your home. If you live in a town or a city, you can probably use natural gas to heat your water. Otherwise, you will probably have to stick with electric.
The other factor is going to determine the type of heater you should get is how much water you need to heat at a time. If you have a lot of folks in your home that need to take a shower each day, then you should probably go for a gas model. If you are looking to save a bit of money and don’t need to heat a lot of water at once, then an electric water heater should do the trick.
Gallons per minute (for tankless models)
If you decide to get a tankless model, then you will need to understand how many gallons per minute you require to keep yourself supplied with the right amount of hot water. If you have a larger home, then you’ll want to get something that has a higher flowrate, like the Rinnai RU Series Sensei SE+. This heater has able to produce 9.8 gallons of hot water per minute, making it perfect for a busier household.
On the other hand, if you only need a little bit of hot water in RV, cabin, or food truck, then the GASLAND BE158S would be a perfect fit. It has a slower heating rate of 1.58 GPM, which is perfect for one or two people but wouldn’t work very well in a more demanding setting.
Recovery rate (for tanked models)
Of course, if you are going to be getting a water heater that comes with a tank, then you need to take the recovery rate into account. This rate is how long it takes for the tank to refill with hot water and is usually measured in gallons per hour. Obviously, the higher the rate, the faster the tank will refill, and you’ll have hot water again.
If you want to get a faster filling tank, then the Rheem MR50245 is the model for you. This tanked model can fill up to 20 gallons per hour, which is the fastest heater we found. If, however, you are on the other end of the spectrum when it comes to your water needs, you can go with a tanked model with a lower recovery rate to save a bit of money. The Bosch 3000 T ES8 would be a good fit in this instance.
Each water heater has a rating based on its efficiency. This number tells you how much energy it takes for the appliance to heat the water. The more efficient the heater, the higher the percentage. For instance, the EcoSmart ECO 11 is 99.8% efficient, which means only 0.2% of the energy expended is lost in the heating process. You want to have a higher percentage for the efficiency, as this will help to save you money on your energy costs.
Something else you need to figure out is how large of a heater your space can handle. While most newer water heaters, especially the best gas or electric water heaters, are usually nice and small. If you are really worried about space, then the Marey GA5PORT is a good unit to check out. It has a very small profile, making it perfect for tighter spaces. With a unit like this, you won’t waste any precious space installing your new water heater.
One of the biggest considerations you need to take into account when you are getting a new water heater is whether or not you are going to be the one to install the unit. If you have a good understanding of plumbing, gas hookups, or hardwiring, then you can probably do the job yourself.
If, however, you are not sure how to attach it yourself, you should probably get an expert to do it for you. The last thing that you want to have is an incorrectly installed water heater. This could lead to leaks, burns, or other problems that are best avoided.
If you do choose to install your water heater on your own, then you definitely need to make sure that you have a good warranty. Even if you have your heater installed professionally, a good warranty is a must. That way, you will be covered if anything goes wrong with your new appliance.
When you are looking at warranties, however, you need to make sure that you read them as carefully as possible. Many companies will claim to offer a great warranty, but actually only cover a small list of features instead of the entire device. By reading the fine print, you will know what is and what isn’t covered under your warranty.
Water heaters are not like many other appliances where you use them all of the time. Instead, these units are usually set up in a manner that you don’t need to fiddle with them at all. That being said, it might not be a bad idea to get one that can be connected to your home’s Wi-Fi. That way, if you do need to adjust it, you can do it remotely from your phone or computer.
Another feature to keep in mind, whether you are going to do the install or no, is how the heater needs to be mounted. The Bosch 3000 T ES8, for instance, can be installed on the wall, shelf, or the floor. It can also be installed in different positions to better fit your space.